Once you have filled the engraved area with a colored paint, you are now able to transform that engraving from the laser finish that it is use to, to any color that you would like. The lasers itself do not come in different colors, however, you can infill the engraving with whatever color acrylic paint that you would like. There is a certain raster engraving that is used, which provides more depth for the acrylic, which than allows it to be filled.

Key Takeaways:

• When you have cut the piece and engraved it using a laser cutter you can start infilling it with a spatula.
• Use a polishing compound that is abrasive as it will be able to work great on acrylic, but be careful.
• You can infill many different types of materials such as marble, stone, slates and also corian.

“We get a good blob of paint and spread it over the areas which are engraved. A lot like when you’re icing a cake.”

Read more: https://cutlasercut.com/guide-to-painting-engraved-acrylic/